wpeditor domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home2/lebrunsc/public_html/steven/wp-includes/functions.php on line 6114
A Collection of Links
Sometimes when you press a button once, it registers as two or more presses. This page offers a solution for Arduino. The hardware solution also applies to other circuits including ones used with a Raspberry Pi computers.
This is an article in the Raspberry Pi User Forums that deals with handling the bouncing signal when a button switch is pressed and released. The code makes use of the RPi.GPIO to access the pins on the GPIO.
This project is intended to provide a friendly object-oriented I/O API and implementation libraries for Java Programmers to access the full I/O capabilities of the Raspberry Pi platform. This project abstracts the low-level native integration and interrupt monitoring to enable Java programmers to focus on implementing their application business logic
A presentations about Java library Pi4J. The presentation was presented by Robert Savage, Software Architect, MTS, Harman International.
The Reference documentation for the WiringPi Library.
The WiringPI Library is a C++ library. WiringPi is a PIN based GPIO access library written in C for the BCM2835 chip found on the Raspberry Pi board.
The Python Module gpiozero was written after the RPi.GPIO Module. It provides a cleaner and simpler interface to accessing the Raspberry Pi GPIO.
A Python Module that provides an interface to the GPIO on a Raspberry Pi.
A PDF that provides the documentation for the gpiozero Python Module for accessing the GPIO on a Raspberry Pi.
The RPi.GPIO is a Python Module that allows access to the GPIO on a Raspberry Pi. This wiki proves examples of using RPi.GPIO and information on using the module.